Tumble Dryer Cut Out Thermostat Kit For Creda Hotpoint Indesit Blue Spot
This compatible blue spot tumble dryer cut-out thermostat kit replaces references C00095674 and 1701896 for the listed Creda, Hotpoint and Indesit models. The listed temperature ratings are 120°C and 150°C.
Product details
- Type: tumble dryer cut-out thermostat kit.
- Identification: blue spot.
- Temperature ratings: 120°C and 150°C.
- Replacement references: C00095674, 1701896.
- Stock reference: 66-HP-25 / W8 / E1.
- Condition: new.
- Compatible aftermarket replacement, not a genuine manufacturer part.
Listed Creda models
37591, 37592E, 37635, 37636E, 37643, 37644, 37646E, 37649, 37652, 37653E, 37654G, 37656, 37658, 37660, 37670, 37734I, 37740, 37742, 37743, 37745E, 37746E, 37750, 37751, 37752, 37753E, 37760, 37761, 37762E, 37762G, 37763X, 37770, 37771, 37772E, 37773X, CDV252, CDV262, CLS00W, T400VW, T510VW, T511VW, T512VW, T520VW, T521VW, T522VW, T530VW, T532VW, TDL11PE, TDL30IS, TDL30PE, TDL30PI, TDL31PE, TR11, TR12, TRE11, TRS11, TU11, TU12.
Listed Indesit models
G73V, G73VU, G73VUEX, G74EXPAI, G74V, G74VEX, G74VEX60, G74VEXPAI, G74VFR, G74VNL, G74VS, G74VSK.
IDL40UK.C and WIXL126UK also appeared in the previous compatibility list. These references are retained for checking; please confirm suitability against the full appliance details and original thermostat reference before ordering.
Listed Hotpoint models
TDL10P, TDL11P, TDL12P, TDL13P, TDL14P, TDL15P, TDL30N, TDL30P, TDL30S, TDL31N, TDL31P, TDL31S, TDL31YS, TDL32N, TDL32P, TDL32S, TDL34N, TDL34P, TDL34S, TDL52N, TDL52P, TDL52S, TDL54N, TDL54P, TDL54S, TFA34N, TFA34P, TFA34S, TFA53N, TFA53P, TFA53S, TL12P, TL51A, TL51P, TL51W, TL52A, TL52P, TL52W, TL61N, TL61P, TL61PE, TL61X, TL62H, TL62N, TL62P, TL62T, TL62U, TL62X, TL63PE, TL64PE, TL71N, TL71P, TL71S, TL71X, TVM35A, TVM55A.
Check before ordering and fitting
Match your appliance's complete model number and existing thermostat references, temperature ratings, connections and mounting arrangement. A blue spot alone does not establish compatibility.
Have the fault diagnosed and this safety-related component fitted by a suitably qualified repairer. Isolate the appliance from the electrical supply before work. The cause of any overheating or cut-out operation must be investigated; never bypass a thermostat or thermal cut-out.
Contact Bartyspares with your full model and existing thermostat details if you need help confirming suitability.