Genuine Dimplex Opti-Myst Glass Disk Transducer | Part M-011B | Burbank Danville Redway Tahoe & More
£76.99
Genuine Dimplex Opti-Myst Glass Disk Transducer – M-011B
Genuine OEM Dimplex Opti-Myst replacement glass disk transducer for electric wall fires and cassette fires. The transducer generates the ultrasonic vibration that creates the water mist effect. A direct like-for-like replacement to restore your fire’s mist effect.
Key Details
- Genuine Dimplex spare part – Classification: Original
- Part number: M-011B
- For use with Dimplex Opti-Myst electric fires
Compatible Models
- Alameda: ALM20 (Series A)
- Auberry: AUB20 (Series A)
- Burbank: BBK20 (Series A–D), BBK20 (Series E)
- Cassette: CAS400HLL, CAS400NHLL, CAS600, CAS600NH
- Danville: DNV20AB (Series A–C), DNV20BL (Series A onwards), DNV20BR (Series A–C), DNV20CH (Series A onwards)
- Moorefield: MFD20 (Series A)
- Oakhurst: OKT20 (Series A)
- Redway: RDY20 (Series A–D), RDY20 (Series E)
- Remote Control: RTOPCS20, RTOPI20BR, RTOPI20CH, RTOPW20
- Sacramento: SCR20 (Series A)
- Silverton: SVT20 (Series A)
- Tahoe: TAH20 (Series A), TAH20 (Series E)
- Westbrook: WBK20 (Series A)
- Whitmore: WMR20 (Series A)
Please verify your Dimplex model and series number before ordering to confirm compatibility.
Troubleshooting Guide
No mist at all
- Check the water tank has sufficient water so the sump is filled and covers the transducer.
- Ensure the transducer is plugged in and seated correctly in the sump, and that the black lead is not crossing over the top of the transducer disc – this can prevent mist forming.
- If the above steps haven’t resolved the issue, the sump fan may have failed. Remove the water tank and mist nozzle, then gently insert the cleaning brush (supplied with your Opti-Myst) into the air outlet on the top right of the sump. You should hear a sound and feel vibration if the fan is working.
- Check all four lamps are fitted and working.
No mist after 30 seconds
- Check the transducer is plugged in and seated correctly. Ensure the black lead is not covering the white disc.
- Follow a regular cleaning regime and remove any calcium deposits from the transducer using the cleaning brush.
Mist cuts out intermittently
- Check there is sufficient water in the sump and the sump fan turns freely.
- Check the transducer is seated correctly and the fan filter is positioned correctly. Also check no water has got underneath the glass disk.
Too much mist
- Adjust the mist effect setting down on the fire.
- If the problem continues, this may be a mist control issue – contact a service engineer.